Inspecting impurities in small vials of serum

A major pharmaceutical manufacturer relies on Cognex In-Sight® vision systems as part of their inspection machines designed to inspect small vials containing serum as well as detecting even the tiniest impurities within the serum. The In-Sight 5603 proved the only solution for this kind of sensitive high speed inspection .

IPF Ingenieria are based in Barcelona in Spain and manufacture special machines destined for high profile industrial customers. One particular customer, Fresenius Kabi, a global leader in infusion therapy and clinical nutrition, needed a special machine capable of tackling the challenge of inspecting small vials of serum. IPF provided them with a machine equipped with In-Sight vision systems from Cognex as recommended and integrated by Cognex partner, Edge Vision.  In this application, In-Sight cameras were installed to inspect the levels of liquid in vials of serum as well as inspecting for impurities at a speed of 10,000 bottles an hour.

Reliable detection even at 1mm
After having worked with different vision suppliers, IPF chose Cognex vision systems for their robustness under industrial duress. For this particular application, the In-Sight 5603 proved the only vision system capable. Why? The application demanded very high resolution vision in order to guarantee no impurities in the serum. When an impurity is as small as one square millimetre you need to know that the vision system you rely on can pick up traces this size. The speed of the 5603 and its ability to memorize inspections at the fastest line rates is remarkable and difficult to match.

10,000 bottles an hour
Each blister pack contains 5 vials of serum. Two machines are equipped with 2 In-Sight cameras. The vials pass along a conveyor where they are inspected by the cameras. In-Sight uses PatMax™, the powerful Cognex vision tool for part finding and localization to locate the units of serum so each individual vial can be inspected for impurities. Any impurities detected result in the rejection of the pack. All inspected vials are sent for packaging.  The vision solution is fully integrated into the company's quality management system. The user friendly development environment in In-Sight Explorer proved beneficial, allowing a convenient user interface for programming vision tasks.

Results and benefits

• Speed – 10,000 bottles inspected per hour
• Eliminates defects reliably at high speed
• No false rejects
• Easy to use
• Easy integration to the company systems
• Return on investment in a year and a half – through reduced labour costs
• Following the positive results, IPF plan to install three more vision-equipped machines at Fresenius Kabi this year.

Vials are small. The rubber stoppers that go in them, even smaller. But small things can lead to big problems for pharmaceutical manufacturers. Prior to capping and sealing, the rubber stopper in a vial must be seated properly. If it isn’t, costly product could be spilled, or sterility compromised. Genesis Machinery Products found that vision sensors work much better than photoelectric sensors when it comes to checking vials for raised stoppers. Vision sensors are less error-prone, more accurate, repeatable, and provide consistent results regardless of normal product-to-product inconsistencies. For pharmaceutical manufacturers, the new vision-based inspection system streamlines product changeovers, minimizes waste and provides data for better tracking of rejects.

When it comes to packaging vaccines or other injectable medicines for patient treatment, pharmaceutical manufactures can ill afford to take risks. That’s why Genesis Machinery Products , a manufacturer of high-tech pharmaceutical-grade packaging systems with expertise in seal integrity, switched from photoeletric sensors to vision sensors on a new vial inspection system that has been deployed at a leading pharmaceutical manufacturer.

The new system has helped the pharmaceutical company to improve the repeatability of the process, while minimizing downtime, changeover time and process waste. The system uses two In-Sight® 5400 vision systems from Cognex Corp.  and provides 100 per cent automatic inspection to detect raised stoppers on vials containing injectable liquid and lyophilized drug products prior to capping and sealing.

“If the rubber stopper on a vial is not seated properly before entering the capper, two things can go wrong,” said Genesis Senior Electrical Engineer Lou Cosentino. “The stopper could be pulled off and product spilled, or, the stopper could be pushed back into the vial and reseated. If this happens, there’s a chance that sterility could be compromised without detection.”  

To assure seal integrity during the capping process, Genesis formerly used photo eyes to check for raised stoppers. The setup required an emitter to send out a very fine beam of light, and an opposing receiver. To work, the emitter and receiver must be mechanically aligned so good vials with properly seated stoppers pass under the beam, and vials with raised stoppers interrupt the beam. When an unseated stopper breaks the beam, the receiver signals the machine to stop so the flawed product can be removed.

The photo eye systems got the job done, according to Cosentino, but they were limited in three ways. First, the system wasn’t truly repeatable. Photo eye alignment depended on which operator set it up. Next, product changeovers were very time consuming. Photo eyes had to be mechanically adjusted each time the vial type changed. Finally, photo eyes would sometimes reject good product due to variations in vial height due to normal manufacturing inconsistencies.

“By using In-Sight vision sensors from Cognex, we’ve taken operator subjectivity out of the equation, tightened the tolerances significantly and improved the process,” says Cosentino. “The vision system isn’t fooled by normal vial inconsistencies, and changeovers now consist of selecting a new job via keyed entry on a touch screen.”

Tapping into vision
Having dabbled with machine vision before, Cosentino thought that vision technology might help improve the photo-eye based system. Cognex was contacted based on the pharmaceutical manufacturer’s recommendation, and a Cognex sales engineer scheduled an onsite evaluation at Genesis. “The sales engineer came in and set up an application demo on my desk, then spent some time going over what I would need to know to fine tune the system,” Cosentino explained.

To set up the application, the In-sight vision spreadsheet interface was used. The process involved selecting vision tools and parameters from drop-down menus. The vision spreadsheet then automatically generated tool results into worksheet cells, which were then linked together to set up the inspection measurements.

“By the time we finished, I felt very comfortable working with the spreadsheet, even with minimal experience. It was great to be able to configure machine vision the same way you use a normal spreadsheet, creating formulas and adding logic tools like ‘if/and’ statements. You can also use multiple vision tools and make reference to those tools just by clicking on the cell,” said Cosentino. “In-Sight was very easy to use, integrate, and set up time was minimal.”

In order to meet a very aggressive customer deadline, Genesis enlisted the consulting services of systems integrator Serview Inc.  to help bring the demo application up to the next level.

“There’s a big difference between inspecting a vial sitting on my desk and a developing a high-speed, rock-solid process application that will meet the demanding requirements of a pharmaceutical manufacturer,” Cosentino said. “With Serview’s help, it took only a few days for us to bridge that gap, and incorporate all the bells and whistles that were required. Serview was instrumental in developing a very robust program, and getting the system up and running. Plus, by the time they were done I felt very comfortable going back in to manipulate the program to optimize operation.”

Detecting raised stoppers
In order to provide full inspection coverage, the final specification required that Genesis integrate two In-Sight 5400 vision sensors into the custom-built machine. The vision sensors are arranged at right angles to each other to ensure that vials with stoppers that are cocked don’t proceed to the capping machine.  “When a stopper is cocked, it may appear seated from one view, but not from the other,” Cosentino explained. “By using two vision sensors, we can ensure that the stopper is properly seated all the way around the circumference of the vial.”

During production, a feed screw spaces vials evenly on a conveyor and they are fed into a series of star wheels. The star wheels transport each vial, one at a time, in front of the two cameras at a rate of 600 per minute. Two red LED backlights located behind the vial inspection position help create optimal image contrast between the vial, stopper, and background to give the vision sensor the clearest possible view of the measurement area.

As a vial enters the field of view and is presented to the cameras, a trigger signal linked to the vision sensor through I/O is provided to initiate image acquisition. The vision sensor captures the image, and transfers it to the on-board vision processor for analysis where a variety of vision software tools are applied. First, the In-Sight PatFind® pattern matching tool compares each image to a pre-trained reference image of the vial and stopper. “It doesn’t matter if the vial height changes due to normal manufacturing variations,” said Cosentino. “PatFind simply looks for the geometric properties of the stopper within the image.”

Once this match has occurred, PatFind determines the exact X, Y, and theta position of the stopper and vial, then fixtures the various vision inspection tools at the right location to measure the distance between the top of the vial and the lip on the stopper. To do this, In-Sight Edge Detection tools are used to find the edges and then calculate the distance between points on each edge.

Operating the system
Each In-Sight vision sensor includes a built-in Ethernet 10/100BASE-T communications port, which connects through an Ethernet switch to a touch-panel computer from Advantech Automation Corp.  The Advantech TPC-1260 touch-panel computer features a 12.1-inch, high-luminance display and a low-power processor.

The TPC-1260 serves as a programming terminal and provides a visual display for the operator. During production, the machine operator can view the inspection image and a green or red pass/fail indicator light on the screen. For product changeovers, the operator selects new jobs via keyed entry on the touch screen.

“With vision, we have the flexibility to easily incorporate other inspection tasks such as checking vial glass for defects, inspecting caps for placement and/or color. We can do OCV, 1D and 2D code reading,” Cosentino said. “By using Cognex vision to do multiple tasks, we can build on our expertise in high-speed vial handling and seal integrity.”